HAKKO FR-802 Hot Air Rework Station

DIGITAL SMD REWORK STATION

The FR-802 is one of the new generation of SMD rework systems from Hakko.

Process controllable. Use the lockout key card to enter temperature settings into the system memory, then when the card is removed, all parameter settings are “locked” into the system memory and cannot be changed without the key card. This feature guards against an operator making accidental or unauthorized temperature changes.

Built-in power save feature automatically turns the hot air stream off if the unit has not been stopped for a pre-selected (30 or 60 minutes) amount of time.

• digital LED temperature display (°F or °C)

• an integrated temperature sensor that allows for consistent and accurate temperature control

• a unique nozzle outlet for consistent temperature of the hot air stream generated by the unit

• a self-contained air source

• easy-to-read variable airflow meter

• automatic cool-down automatically engages when stop button pressed

• compact design uses less work area than previous models

• ESD safe by design

SPECIFICATIONS

Model	Hakko FR-802
Part Number	FR802-11

Station

Total Power Consumption	120V - 430W
Station Power Consumption	30W (Stand-by Mode: 4W)
Handpiece Power Consumption	430W
Pump Type	Diaphragm pump
Pump Capacity	5 to 20 l/min. (max)
Control Temperature*	100 to 500°C (212 to 930°F)  *measured at heater sensor
Handpiece Length (w/o cord)	200 (L) mm (7.8 in)
Handpiece Weight (w/o cord)	200 g (0.44 lb.)
Outer Dimensions	160(W) x 145(H) x 230(D) mm [6.3(W) x 5.7(H) x 9.1(D) in.]
Weight	4.3 kg (9.48 lbs.)

Note: Specifications subject to change without notice Contents

Name	Part Number	Quantity
FR-802 Station	n/a	1
Power cord	B2419	1
Handpiece holder	B3006	1
FP pickup w/ 1pc (S) & (L)	B1438	1
Control card	B2972	1
Manual	n/a	1